Fit a battery door contact sensor

What will you learn?

Pair and stick a Tapo T110 contact sensor to an indoor door. A compatible Tapo hub is required.

Tools

• 1 smartphone with Tapo app; 1 ruler; 1 soft clothSearch Amazon UAE ↗

Materials

• 1 Tapo T110 sensor and magnet with installed battery and supplied adhesive padsSearch Amazon UAE ↗
• 1 compatible Tapo hub already paired; working home networkSearch Amazon UAE ↗

Step by step

Photorealistic illustration · Waey

1. Pair beside the hub

Remove the sensor’s battery insulation tab. In Tapo, choose Add device, Sensors, T110. Select the compatible hub and follow the pairing prompts.

Photorealistic illustration · Waey

2. Test before sticking

Hold the sensor and magnet at the intended location. Separate and reunite them. Confirm that open and closed events appear correctly in the app.

Photorealistic illustration · Waey

3. Align and attach

Clean and dry the mounting faces. Put one part on the fixed frame and the other on the moving door. Align their marks; keep the closed gap no more than 15 mm. Press the supplied pads firmly.

Photorealistic illustration · Waey

4. Check alerts

Open and close the door several times. Check status and event history. If you want phone alerts, enable them in Tapo and allow notifications in phone settings, then test again.

Watch the method

Final checks

Do not mount until the location test passes. If events are unreliable, move the hub or sensor and retest before attaching.

Software & apps

Tapo app; a compatible hub must already be added.