Woodwork & furniture
Shelves · Assembly · Restoration
Re-oil a John Boos maple cutting board
Refresh a sound John Boos maple cutting board with the specified oil. Clean and dry it, coat both faces and edges, then wipe off visible excess the next day.
Start learning →
Install a BURHULT shelf on matching SIBBHULT brackets
Fit one small white shelf to matching plastic brackets on verified sound masonry, using a competent preselected fixing schedule for the actual wall and shelf.
Start learning →
Edge-band a plywood panel with iron-on wood veneer
Cover one straight bare plywood edge with preglued wood veneer, then cool, trim, smooth and check the bond.
Start learning →
Make a small mitred wooden picture frame
Build a small tabletop picture frame from ready-rebated softwood moulding. Match hand-cut mitres, glue and clamp the corners, fit acrylic and a practice print, then add a matched tabletop support.
Start learning →
Build a removable two-bay plywood shelf organizer
Turn a measured shelf opening into a finished two-bay insert with an accurate cut list, pocket-hole joints, square back and compatible clear finish.
Start learning →
Install cabinet pulls with a drilling jig and correct screw fit
Fit a two-screw pull to a sound removable timber front: prove the jig on scrap, drill supported holes, choose compatible screws and check the refitted front.
Start learning →
Refinish a wooden stool: choose paint, oil or wax
Prepare a sound wooden stool and complete one compatible finish, with separate paint, oil and wax routes and product-directed curing.
Start learning →