Measuring
Check a manual box level and mark a short horizontal line
Author: Waey TeamPublished:
Repeat the horizontal reversal check on one footprint, then center the checked vial to draw and recheck a short wall reference.
Start learning →
Measure a practice bushing with a digital caliper
Author: Waey TeamPublished:
Check a matched ABS caliper, measure a removed bushing’s outside, bore and length, and record repeat readings without claiming calibration.
Start learning →
Measure, hand-crosscut and check a softwood blank
Author: Waey TeamAdded:
Lay out, hand-crosscut and check a 300 mm nonstructural softwood blank, keeping the saw kerf on the waste side.
Start learning →